Vision X
- Backrest
- High back with an aluminum spine
- Headrest
- Adjustable in height and depth
- Character
- A more substantial presence for a dedicated workspace
- Weight
- A few kilograms heavier than Vision Y
Photos
Loading model…
Couldn’t load the 3D model
The Vision Chair
$2,950.00
USD Free US shipping Est. dispatch January 2027
Full payment at checkout
The Vision Chair is the first chair to introduce Elevated Seating, a posture-first design that combines the ease of sitting with the benefits of standing.
Model
Color Selection
Edition Black Swan Edition Deep Coal
LowHigh
Elevated Seating works best with a height-adjustable desk. A suitable desk riser with an adjustable monitor is an alternative. Check before ordering.
01 / FIND YOUR VISION
Two models. One experience.
Vision X has a high back and adjustable headrest. Vision Y is lighter, with a mid back and no headrest.
Photographs of the Vision Chair. Explore each model from the front and back.
Vision Y
- Backrest
- Mid back with a compact silhouette
- Headrest
- No headrest
- Character
- A streamlined format for office, hybrid and mobile work environments
- Weight
- A few kilograms lighter than Vision X
Showing both models in Deep Coal, front view
02 / PURPOSE IN EVERY DETAIL
What makes Vision different
Combining the ease of sitting with the benefits of standing.
01 / THE ENGINEERING
T-Mech™
The seat moves around the knee while the backrest moves with you.
02 / THE FINISH
Anti-Slip Matrix™
Performance stretch knit with rubber dots to help prevent forward sliding.
Before you order
The practical details, in one place.
Full payment
Charged at checkout
January 2027
Current shipping estimate
Free US shipping
As offered in the configurator
Desk Compatibility
Will my desk work with Elevated Seating?
Elevated Seating positions you between sitting and standing, so you sit noticeably higher than in a conventional chair. Your keyboard, mouse, and screen need to rise with you, and a standard fixed-height desk is usually too low.
How high you need to go depends on your body and on how upright you set the chair. The more elevated your seat angle, the higher your desk needs to be, so being able to adjust your desk is part of getting the full experience.
The recommended setup: a height-adjustable desk
A height-adjustable desk with a range of roughly 70 to 125 cm (28 to 49 inches) covers the full span of Elevated Seating, from a relaxed lower recline to the most upright position. It lets you fine-tune your working height in seconds whenever you change your seat angle.
No height-adjustable desk? A desk riser can work
If your desk is fixed, a desk riser (a sit-stand converter that sits on top of your desk) can raise your keyboard and mouse to the right height. For this setup to work well, your monitor should also be height-adjustable, either on the riser's upper shelf or on a separate monitor arm, so your screen stays at eye level while your hands stay at elbow height. Check the riser's height range and load rating against your equipment.
A height-adjustable desk remains the setup we recommend; a riser is a workable alternative, not an equal one.
Not sure? We'll check for you. Send us your height and your desk's dimensions and we'll confirm whether your setup is ready for Elevated Seating.
Warranty and support
10-year limited warranty on the frame, base, T-Mech mechanism, gas springs, shells, armrests and casters. 5 years on upholstery, foam and armpad surfaces. Coverage applies to the original purchaser and starts on the date of delivery. Normal wear, misuse and the other exclusions in the warranty are not covered.
Pre-order payment and shipping
Your pre-order is paid in full at checkout. The current shipping estimate is January 2027, with free US shipping as shown in the configurator.
For delivery questions or destinations outside the US, contact Levitask before ordering.
Cancellations and returns
30-day returns. Returns must be shipped in the original box. Contact [email protected] for assistance.
Care and cleaning
Wipe with a soft dry cloth. Blot spills promptly with cool water and a little pH-neutral detergent, then air dry.
Do not use alcohol, solvents, bleach, abrasive pads or steam.
Never open, heat, strike or lubricate the gas lift.
Assembly
The Vision Chair assembles without tools. Two people are recommended for assembly, though it is not required.
Tools can help separate the mechanism and base from the gas lift during disassembly. Contact [email protected] for guidance.
Ask us about assembly for help putting your chair together.
Materials and finishes
| Part | Deep Coal | Cosmic Gray |
|---|---|---|
| Backrest fabric | Performance stretch knit | Performance stretch knit |
| Shells | Nylon | Nylon |
| Arm pads | PU | PU |
| Base | Electro-coated matte black aluminum | PVD mirror-coated aluminum |
| Frame | Electro-coated matte black aluminum | PVD mirror-coated aluminum |
| Seat fabric | Performance stretch knit with Anti-Slip Matrix™ rubber dots | Performance stretch knit with Anti-Slip Matrix™ rubber dots |
| T-Mech | Electro-coated matte black aluminum | PVD mirror-coated aluminum |
| Wheels | TPU | TPU |
Specifications and dimensions
- Vision X
- High back; headrest adjustable in height and depth
- Vision Y
- Mid back; no headrest
- Armrests
- 4D: height, width, depth and swivel adjustment
- Casters
- 70 mm hubless twin-wheel casters
- Maximum load
- 125 kg / 275 lb
- Fit by standpipe
- Short: 150–180 cm (approx. 4 ft 11 in–5 ft 11 in), seat height 38–46 cm. Tall: 175–205 cm (approx. 5 ft 9 in–6 ft 9 in), seat height 46–58 cm. The two ranges overlap between 175 cm and 180 cm, where desk height is the deciding factor.
- Backrest adjustment
- Height and depth
Specifications
Model
Short standpipe
Tall standpipe
All measurements are in centimetres.
40 years in the making
For Klaus Kummer, the Vision Chair is the result of four decades spent questioning how a chair can better support the way we sit.
Decades of prototypes led to T-Mech™ and the Vision Chair. Explore some of those early ideas below.
Read Klaus’s story
